Back to cart
Ferrite Disc Magnet - 20mm x 6mm
Product code: 10030
Prices are VAT Incl.
Volume pricing available on requestAustralia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Magnetic Product Description:
This ferrite disc magnet has a diameter of 20mm and a thickness of 6mm. It has a magnetic flux reading of 1978 Gauss and a pull force of 700 grams. It is identified by the AMF magnet part number 10030.
Uses for our ferrite disc magnets:
These Ferrite Discs have been superseded by smaller, stronger Neodymium products since the mid-1980s but Ferrite magnets, also known as Ceramic magnets, still offer benefits in terms of their cost-effectiveness and high resistance to corrosion. For single use or temporary applications that are outdoors, exposed to water or in environments, Ferrite Discs present a viable option. Combinations of disc height and diameter from our range will provide the correct amount of magnetic adhesion for your project. Unlike Block shapes, a routing tool or drill will make an appropriate recess for a Disc to lie in. At a depth of 6mm, these discs can be recessed and glued into timber or similar material and used to hold tools in place or to create a removable bond between two surfaces.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specific values within that range.
Magnetic Product Description:
This ferrite disc magnet has a diameter of 20mm and a thickness of 6mm. It has a magnetic flux reading of 1978 Gauss and a pull force of 700 grams. It is identified by the AMF magnet part number 10030.
Uses for our ferrite disc magnets:
These Ferrite Discs have been superseded by smaller, stronger Neodymium products since the mid-1980s but Ferrite magnets, also known as Ceramic magnets, still offer benefits in terms of their cost-effectiveness and high resistance to corrosion. For single use or temporary applications that are outdoors, exposed to water or in environments, Ferrite Discs present a viable option. Combinations of disc height and diameter from our range will provide the correct amount of magnetic adhesion for your project. Unlike Block shapes, a routing tool or drill will make an appropriate recess for a Disc to lie in. At a depth of 6mm, these discs can be recessed and glued into timber or similar material and used to hold tools in place or to create a removable bond between two surfaces.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specific values within that range.
