Back to cart
Neodymium Ring - 19mm x 8mm x 4mm
Product code: 23008
Prices are VAT Incl.
Volume pricing available on requestAustralia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Magnetic Product Description:
This rare earth ring magnet has an outside diameter of 19mm, an inside diameter of 8mm and a thickness of 4mm. It is identified by the AMF magnet part number 23008.
Uses for our rare earth ring magnets:
Rare Earth Ring Magnets have advantages over Disc or Block type magnets. The void gives them the ability to slot over pins, axles or on shafts that hold them in place but allow some regulated movement in a predetermined direction. Proscribed movement is restricted by the locating pin while lateral or vertical movement, initiated by magnetic attraction or repulsion, is used to separate moving parts and eliminate friction or indicate by their incremental movement, wear or deterioration of metal or synthetic bushes and bearings. The reactive ability of Ring magnets on a shaft can reduce friction wear and the need for regular lubrication and is used in heavy-duty suspension and braking systems of locomotive rolling stock, industrial machinery and other vehicles to prolong their working life and maximise service intervals.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Magnetic Product Description:
This rare earth ring magnet has an outside diameter of 19mm, an inside diameter of 8mm and a thickness of 4mm. It is identified by the AMF magnet part number 23008.
Uses for our rare earth ring magnets:
Rare Earth Ring Magnets have advantages over Disc or Block type magnets. The void gives them the ability to slot over pins, axles or on shafts that hold them in place but allow some regulated movement in a predetermined direction. Proscribed movement is restricted by the locating pin while lateral or vertical movement, initiated by magnetic attraction or repulsion, is used to separate moving parts and eliminate friction or indicate by their incremental movement, wear or deterioration of metal or synthetic bushes and bearings. The reactive ability of Ring magnets on a shaft can reduce friction wear and the need for regular lubrication and is used in heavy-duty suspension and braking systems of locomotive rolling stock, industrial machinery and other vehicles to prolong their working life and maximise service intervals.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
