Back to cart
Neodymium Disc - 6mm x 2.5mm N35H (Diametrically Magnetised)
Product code: 93269
Prices are VAT Incl.
Volume pricing available on requestAustralia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Magnetic Product Description:
This rare earth disc magnet has a diameter of 6mm and a height of 2.5mm. It has a magnetic flux reading of 3873 Gauss and a pull force of 612 grams. It is identified by the AMF magnet part number 93269. Limited stock.
Uses for our rare earth disc magnets:
This small Neodymium disc is DIAMETRICALLY magnetized with the poles located through the diameter or width dimension. It also has been manufactured in N35H Grade to allow it to operate in temperatures up to 120°C without demagnetising. It is manufactured for specialized commercial processes that encounter heat.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Magnetic Product Description:
This rare earth disc magnet has a diameter of 6mm and a height of 2.5mm. It has a magnetic flux reading of 3873 Gauss and a pull force of 612 grams. It is identified by the AMF magnet part number 93269. Limited stock.
Uses for our rare earth disc magnets:
This small Neodymium disc is DIAMETRICALLY magnetized with the poles located through the diameter or width dimension. It also has been manufactured in N35H Grade to allow it to operate in temperatures up to 120°C without demagnetising. It is manufactured for specialized commercial processes that encounter heat.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
